Contents
BUSHNELL TECHNICAL SUPPORT LASER RANGEFINDERS
If your laser does not turn on or the LCD screen does not illuminate, re-press the POWER/FIRE button. If you are experiencing issues with the unit giving inconsistent distances, not locking on to the pin or not jolting it may be experiencing a battery related issue..
How do you turn on the slope on a Bushnell?
Can you turn off slope on Bushnell v3?
The Tour v3 introduces Bushnell’s JOLT technology, which provides short bursts of vibration to indicate that its PinSeeker technology has locked onto a target. The JOLT technology may not be for everyone, but if you don’t like it, you can turn it off – we found ourselves appreciating it more over time.
How do you reset a golf rangefinder?
– Hold down the bottom left-hand button and power button together for 15 seconds or until the unit switches off then turn it back on using power button. This will reboot the device and it will no longer be frozen.
How do you use a Bushnell Tour V3 rangefinder?
How do I clean my Bushnell rangefinder?
Simply breathe lightly on the lens to provide a slight amount of moisture, then gently rub the lens with the microfiber cloth. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used.
Can you turn off slope on Bushnell V3?
The Tour v3 introduces Bushnell’s JOLT technology, which provides short bursts of vibration to indicate that its PinSeeker technology has locked onto a target. The JOLT technology may not be for everyone, but if you don’t like it, you can turn it off – we found ourselves appreciating it more over time.
Does the Bushnell Tour V3 have slope?
This Bushnell Tour V3 Slope goes a step further with Slope Technology for those inevitable inclines and declines on a refreshing unpredictable course. And, with the standard Bushnell PinSeeker and JOLT technologies behind your back, no distance will be beyond you.
How do I change my Bushnell rangefinder to yards? To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters. When the units you want to use are displayed, release the POWER/FIRE button to select it.
How do I update my Bushnell?
Once your device is registered, log into the https://bushnell.igolf.com/ website and connect your device. The website should have you download the installer program and update your device. The device update can take up to 45 minutes.
Where is the mode button on a Bushnell rangefinder?
To select between yards and meters, look through the monocular, depress the “mode” button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds.
How do I reset my Bushnell?
– Hold down the bottom left-hand button and power button together for 15 seconds or until the unit switches off then turn it back on using power button. This will reboot the device and it will no longer be frozen. – The device is relatively sensitive to being “properly ejected” after being plugged into a computer.
How do I connect my Bushnell Golf?
Advanced Instructions – Initial Pairing For Android:
- Restart the phone (initial pairing only).
- Start with both the speaker and remote turned OFF.
- Go to the Bluetooth settings on your phone.
- Look at the previously paired Bluetooth devices.
- Open the Bushnell app on your phone.
- Select Add New Device.
How do you turn off a Bushnell?
Press and hold (7 sec.) to power ON/OFF.
What is Bushnell jolt technology? According to Bushnell, when the golfer aims at the flag, the JOLT technology will provide short vibrating bursts to reinforce that the rangefinder’s PinSeeker technology has isolated the target and locked onto the flag.
How do you reset a Bushnell Tour V4 rangefinder? To reset a Bushnell Tour V4 rangefinder, first turn it off. Next, hold down the power button for about 5 seconds until the rangefinder beeps. Then release the button and press it again. The rangefinder should now be reset.
How do I change my range finder to yards? To select between yards and meters, press and hold the POWER/FIRE button. The display will begin to cycle through the setup options: Yards w/JOLT, Yards, Meters w/JOLT, Meters (for details on the JOLT feature, see “About JOLT”).
How do you use a Bushnell Tour v3 rangefinder?
What is iGolf Sync app?
iGolf Connect® is a content delivery platform that supplies golf course information and GPS content to application developers, connected hardware manufacturers and website operators.
How do I change my V4 from meters to yards?
To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters (for details on the Slope feature, see “About Tour V4 Shift with Slope Technology”).
How do I change my Bushnell Tour V3 rangefinder from meters to yards?
The TOUR V3 can be used to measure distances in yards or meters. The unit of measure indicators are located in the lower right portion of the LCD. To select between yards and meters, press and hold the POWER/FIRE button.
Why is my Bushnell Tour v4 not working?
Replace the battery when the unit does not turn on, display does not illuminate, or the display goes blank when attempting to power the laser. Use a good quality 3 -volt lithium battery (CR2). Insert into the compartment with the negative (flat) end first (positive end facing out towards the battery cover).
How do you use a Bushnell Tour v5?
How do I setup my Bushnell rangefinder?
How do you open a Bushnell rangefinder?
