Contents
Faulty wiring is another common issue that can cause your Xfinity Cable Box to flash white. Check all the connections between your cable box and router and ensure that they are all firmly connected to the correct ports..
How do I do a hard reset on my cable box?
How do I reset my Xfinity box?
The easiest way to restart your TV Box is to say “Restart TV Box” into your Xfinity Voice Remote .
Restart Using the Power Button
- Ensure your cables are tightly secured.
- Press and hold the Power button located on the front of the TV Box for 10 seconds.
- The TV Box should automatically restart.
How do I reboot my Xfinity router?
To manually restart your Xfinity router, do the following:
- Locate the “Reset” button found either at the front or back of the router.
- Hold down the button for at least five seconds.
- Once you release the button, your router is reset and will restart.
How do I know if my cable box is bad?
Power off your TV Box. Remove the power cable from the back of the unit.
What are the signs of a bad HDMI cable?
- “Shooting stars” or sparkling in the picture.
- Fuzzy or blurry picture.
- No picture or intermittent picture.
- No sound or intermittent sound.
- Weird colors in the picture.
- Remotes don’t work.
Why is my internet blinking green?
The Internet light will be green when the modem established an Internet connection with the ISP. The Internet light will blink green after establishing a connection with the ISP indicating traffic on the Internet.
How do I know if my Comcast modem is bad?
5 Warning Signs Your Cable Modem is Dying
- Connection indicator lights have turned off even if you can still surf the web.
- Data transfers/downloads are slow.
- The connection speeds are slow.
- The modem is making a lot of loud or weird noises.
- The modem turns off or stops functioning.
Why is my router blinking white?
It indicates that the router is connected to the equipment at your premises, and Wi-Fi and internet services are active and functioning well. It usually stays for about 30 seconds and then turns off. Fast-blinking white happens during Hard reset / Reboot and Firmware upgrade.
How do I fix the blinking white light on my Xfinity router? One of the reasons for the Xfinity router flashing white light can be an incomplete activation process. All you have to do is to complete the activation process and the blinking white light should be fixed.
Why is my Xfinity cable box not working?
If your Xfinity Cable Box isn’t working, restart the Comcast cable box. If this doesn’t get the Xfinity cable box to work, proceed to factory reset it. I’ve also talked about using the Xfinity My Account App to reset your cable box, using the restore default option, and calling Comcast Tech Support.
Why is my Xfinity box stuck on boot?
To fix Xfinity stuck on the welcome screen, check if your connections are tight and right. Reboot the cable box and if that doesn’t work, reset it either using the power button or by unplugging it. Restarting the gateway could also fix the issue. If you have a Flex device, connect it using the WPS button.
Why is my Xfinity router blinking green?
If your xFi modem-router is blinking green, it means that it is having trouble connecting to the Internet. You can solve this problem by disconnecting and reconnecting your devices, checking for loose cable connections, checking for power outages, etc.
What color should the light on my Xfinity router be?
Device Status and Light Activity
| Light Activity | Status of Device |
|---|---|
| No light | Off |
| White steady light or white steady light with purple tint (post-activation) | On/Operational |
| White steady or blinking light / white steady or blinking light with purple tint (during activation) | Limited Operational |
| Red steady light | No Internet connection |
How do I know if my Comcast modem is working?
Troubleshoot Internet through the Xfinity My Account app
- Open the Xfinity My Account app (available for Apple & Android).
- Scroll down and select the Internet tile.
- Select your modem, and then press Restart this device. This can take up to seven minutes. Your home Internet will be offline during this process.
Why is my Xfinity router blinking white? What is this? If the white light is blinking, it means that the connection between your Xfinity router and the internet is not stable and is getting interrupted. Some newer Xfinity models have white light with a slight purple tint to them. There may be some physical reasons that cause a network issue.
What happens when I press the WPS button on my router? Press the WPS button on your router to turn on the discovery of new devices. Then, go to your device and select the network you want to connect to. The device is automatically connected to the wireless network without having to enter the network password.
Does pressing the WPS button reset router? The WPS light will continue to flash and the router search for devices for up to 2 minutes. If it doesn’t connect successfully in that time, it will usually reset and you will need to press it again to try a new connection.
Why is my Xfinity cable box blinking blue?
The flashing blue light on your Xfinity router indicates WPS pairing mode. It means that the router is looking to establish a secure connection with a wireless device. Then, it automatically changes to steady white light, indicating a protected link between the gateway and another device.
What is WPS button on Xfinity router?
What is WPS (Push Button) and how to use it? WPS or Wi-Fi Protected Setup is a wireless network security standard that helps you to establish connections between your Xfinity router and wireless devices. It basically simply the connection between your router and other devices.
How do I test my cable box?
Walk around the perimeter of your house, and find the electric meter box attached to the outside of your home. Typically, the outside cable box is located next to other utility boxes attached to your home, including the electric meter box and telephone box.
How often should you replace your cable box?
Cable modems can last many years, but advances in Internet technology can greatly improve your Internet performance. Typically, you should look to upgrade or replace your cable modem every two to four years.
Is it OK to leave cable box on all the time?
If it is a regular box, go ahead and turn it off. Nothing gained at all be leaving it on. If it is a DVR, it is best to leave it on. If it is off and it comes on for a scheduled recording, it will come on with the audio muted.
How long does Xfinity cable box take to reboot?
In most cases, your TV Box should reset in 15 minutes. In some cases, the program guide or other services may take 45 minutes before they are available.
How long does it take Xfinity cable box to boot?
It may take up to 15 minutes for the Cable Box to boot. Other services, such as the program, may take up to 45 minutes to become available. This means you’ll have to wait a while and keep the device powered on for it to boot.
How do I send a refresh signal to my Comcast box? Performing a System Refresh on X1
- Press the A button on your remote control, or visit the Help section in Settings.
- Highlight the System Refresh tile, and press OK.
- Please remember that performing a System Refresh will interrupt all X1 TVs and recordings in your home for up to 10 minutes.
Why has my TV suddenly got no signal?
Check the cable connections between the TV and your video device or receiver. Change the channel or try a different input device or movie. The received signal may be weak. If your TV uses a cable or satellite box, you may need to contact your service provider for further assistance in improving the signal strength.
Why is my cable box not connecting to my TV? Reboot the TV and the Cable Box
To do this, either use your remote or the power button on the box itself. Then, wait for a few minutes to turn it back on. After that, reboot your TV. Turn off your TV and wait for a few minutes to turn it back on as well.
Why is my cable box blinking green?
When you see the green blinking light on your cable box it generally means there is something wrong with the unit. The possible causes for that are: there is a software upgrade running. no signal.
