Contents
There is actually no on/off button for the Sphero SPRK+ model. Previously, students could use the Sphero SPRK+ app to turn on the SPRK+ by holding their device next to the robot. Now, it’s best to use the Sphero Play or Sphero Edu app..
How do I wake up my Sphero Mini?
To wake, simply launch the Sphero Play application next to your robot. Power Off — if you navigated to the setting page of the Sphero Play app and selected “Power Off”, your Mini is powered off. To wake from Power Off, plug your Mini in, wait for the LED light to turn on, and then launch the application.
Why is my Sphero Mini not connecting?
To resolve this issue, make sure that all Bluetooth devices you could use to connect to Sphero (smartphones, tablets, iPods, etc.) within 50 feet are turned off or have Bluetooth turned off. Place Sphero in the charger and hit the button on the side of the charger, this should hard reset Sphero.
How do I know when my Sphero Mini is charged?
Make sure the cord is securely plugged into the back of the cradle, plug the cord into your outlet, and plop Sphero into the cradle. While Sphero is charging, the blue light on the front of the cradle will flash slowly, and once Sphero is charged the light will glow a solid blue.
Why does my Sphero blink red?
Your Sphero app-enabled robot may blink a red light sequence after being removed from the charging cradle after a full charge. A quick red flash indicates that firmware of your Sphero app-enabled robot needs to be updated.
How long does it take bb8 to charge?
It takes up to three hours to fully charge him. 4 of 5 found this helpful.
How long does a Sphero Mini take to charge?
How long does it take to charge my Sphero Mini? One hour.
Can you rename a Sphero?
@basil60 Currently you can not rename any sphero robots but when you connect to a robot it will light up.
How do I change the battery in my Sphero? With the exception of Sphero RVR, the batteries in Sphero robots cannot be replaced. Sphero robots were designed to be durable and waterproof – because of this, the outer polycarbonate shells are fused together. Sphero Mini’s shell is not fused together, but the battery cannot be replaced.
How do I turn Sphero Mini off?
To power off the Mini, find the Settings section within the app and select Power Off. Also, to wake up the Mini, plug it in and wait for the LED to turn on. Currently, you can only connect one Sphero Mini to a device at a time.
Why is my Sphero Mini flashing red?
Your Sphero app-enabled robot may blink a red light sequence after being removed from the charging cradle after a full charge. A quick red flash indicates that firmware of your Sphero app-enabled robot needs to be updated. You can learn more about firmware updates here.
What do Sphero lights mean?
Slow blinking red lights on SPRK+ indicate that you started a firmware that did not complete. Please reconnect SPRK+ to the Sphero Edu app and allow the firmware update to complete and SPRK+ will return to Play mode. Sleep. Sleep mode is the default mode when SPRK+ is not connected to a mobile device.
How long does Sphero Mini battery last?
Sphero’s battery should last up to 60 minutes of constant play on a full charge. If Sphero has been fully charged but loses energy and turns off shortly after connecting, please try the following: Ensure Sphero sits properly in the charging cradle, heavy side down, and receives a full charge.
Can Sphero go in water?
Is Sphero BOLT Waterproof? Yes! BOLT is waterproof (as pictured above) and ready for aquatic adventures.
Why wont my Sphero wake up? Put the SPRK+ back on the charging cradle and hold the button for 3-5 seconds. The should reset the robot. The SPRK+ should light up. Try reconnecting the robot.
How do I change the battery in my Sphero?
Is the sphero BB 8 waterproof? Sphero is waterproof up to 5m or 15ft. He will actually float on top of water. Please note that water can interfere with your Bluetooth connection which can cause a drop in connection.
What do you do when your Sphero wont turn on?
Place Sphero on its charging base and press the button on the side of the charger while removing Sphero from the charger. To verify Sphero is reset, try tapping to wake. If Sphero does not wake, reset is successful. Place back on the charger to activate.
How long does a Sphero last?
Sphero’s battery should last up to 60 minutes of constant play on a full charge. If Sphero has been fully charged but loses energy and turns off shortly after connecting, please try the following: Ensure Sphero sits properly in the charging cradle, heavy side down, and receives a full charge.
Can you leave Sphero on charger?
Feel free to leave Sphero plugged in and on his charging base for extended periods of time. IMPORTANT SAFETY TIP: DO NOT PLACE ANY OBJECTS IN THE SPHERO CHARGER OTHER THAN SPHERO.
Is bb9e waterproof?
Greetings, Thanks for your interest in BB-9E! I am afraid his dome is NOT waterproof (LED lights, etc). But his body is waterproof. If you have additional questions, please do not hesitate to contact us – -support@sphero.com — thanks very much!
Why is my sphero mini purple?
If you are driving BOLT and drive out of Bluetooth range, or the Sphero Edu app crashes, the front/back LED’s will turn solid purple and you will enter ACCIDENTAL DISCONNECT mode. This modes continues for 5 minutes until the robot times out and turns to SLEEP mode. The robot is still discoverable in this mode.
How do I update Sphero firmware?
Start the Sphero Edu app on your supported device and connect to your Sphero RVR. The Sphero RVR firmware update will automatically start. Depending on your device, this may take between three and 7 minutes. To confirm you have the correct firmware, click on the “connect” button and review the firmware numbers.
How do I contact Sphero?
Sphero Inc
- SECTOR. Technology.
- INDUSTRY. Software & Tech Services.
- SUB-INDUSTRY. Software.
- INCORPORATED. 03/16/2011.
- ADDRESS. 4772 Walnut Street Suite 206 Boulder, CO 80301 United States.
- PHONE. 1-303-502-9466.
- WEBSITE. www.sphero.com.
- NO. OF EMPLOYEES. —
How long does a sphero mini take to charge? How long does it take to charge my Sphero Mini? One hour.
Does sphero Force band work with bb9e?
Answer: The Force Band is compatible with all Sphero App-Enabled Droids. This includes BB-8, Battle-Worn BB-8, BB-9E, R2-D2, and R2-Q5.
Are Sphero minis waterproof? Is Sphero Mini waterproof? Sphero is not waterproof with or without its shell. We wouldn’t recommend taking your bot for a swim.
How does Sphero Mini work?
Think of it like a Segway stuck inside of a ball. Sphero might not look like it has a front or back, but the robot inside does thanks to the help of a gyroscope. When Sphero is commanded to drive in a new direction, it’s able to rapidly rotate to face the right way based on its position relative to the user.
How fast is Sphero Mini? STEM Activities
| Sphero Mini | |
|---|---|
| Robot Size | About as big as a ping pong ball |
| Support Guides | Downloadable at-home learning guide. |
| Material | Plastic shell opens for charging and exploring the robot. |
| Top Speed | 1 meter per sec (2.2 mph) |
