Contents
– Hold down the bottom left-hand button and power button together for 15 seconds or until the unit switches off then turn it back on using power button. This will reboot the device and it will no longer be frozen..
Why is my Bushnell Tour V4 not working?
Replace the battery when the unit does not turn on, display does not illuminate, or the display goes blank when attempting to power the laser. Use a good quality 3 -volt lithium battery (CR2). Insert into the compartment with the negative (flat) end first (positive end facing out towards the battery cover).
How do I update my Bushnell?
Once your device is registered, log into the https://bushnell.igolf.com/ website and connect your device. The website should have you download the installer program and update your device. The device update can take up to 45 minutes.
Why is my rangefinder blurry?
If the reticle appears fuzzy, or requires a little time to come into sharp focus, further adjustment is needed. Turn the eyepiece clockwise another full turn and repeat STEP 8. 8. Keep doing this until the reticle is sharp the instant you put your eye to the scope.
What is iGolf Sync app?
iGolf Connect® is a content delivery platform that supplies golf course information and GPS content to application developers, connected hardware manufacturers and website operators.
How do you clean the inside of a rangefinder lens?
Below are the steps on how to clean a golf rangefinder, in brief.
- Switch the device off.
- Take out the removable parts.
- Remove dirt or dust your hands or an appropriate tool.
- You could improvise DIY tools to remove the sticky dust and dirt.
- Get the right cleaning agent.
- Get a soft cleaning cloth (mostly included)
How do you clean a foggy rangefinder?
And it is easier than you think. First remove the top: remove screws and turn the round nut on the film advance lever normally (ie, counterclockwise to loosen). After the top is off you CAREFULLY wipe all the glass surfaces with a soft, clean tissue impregnated with water with a bit of dish liquid.
Where is the mode button on a Bushnell rangefinder?
To select between yards and meters, look through the monocular, depress the “mode” button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds.
How do I change my Bushnell v4 from meters to yards? While looking through the eyepiece, press and hold the POWER button down for approximately 5 seconds. During this time all liquid crystal segments and icons will be displayed. As you continue to depress the power button, the display will toggle back and forth between Yards and Meters.
Why is my Bushnell not working?
BUSHNELL TECHNICAL SUPPORT LASER RANGEFINDERS
If your laser does not turn on or the LCD screen does not illuminate, re-press the POWER/FIRE button. If you are experiencing issues with the unit giving inconsistent distances, not locking on to the pin or not jolting it may be experiencing a battery related issue.
How do I connect my Bushnell Golf?
Advanced Instructions – Initial Pairing For Android:
- Restart the phone (initial pairing only).
- Start with both the speaker and remote turned OFF.
- Go to the Bluetooth settings on your phone.
- Look at the previously paired Bluetooth devices.
- Open the Bushnell app on your phone.
- Select Add New Device.
How do I clean the lens on my Bushnell rangefinder?
Simply breathe lightly on the lens to provide a slight amount of moisture, then gently rub the lens with the microfiber cloth. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used.
How do I setup my Bushnell rangefinder?
How do you clean a rangefinder?
Below are the steps on how to clean a golf rangefinder, in brief.
- Switch the device off.
- Take out the removable parts.
- Remove dirt or dust your hands or an appropriate tool.
- You could improvise DIY tools to remove the sticky dust and dirt.
- Get the right cleaning agent.
- Get a soft cleaning cloth (mostly included)
How do you charge a Bushnell rangefinder? To charge the battery, pull the rubber cover-up from the USB port on the back of the unit (12). Connect the provided USB cable. Connect the other end of the cable to any standard smartphone charger and plug it into an AC outlet (110-120 volt).
Is the Bushnell app free? Free to download for all Bushnell Golf product owners and suitable for both Apple and Android phone users, the App provides access to premium graphics and technology designed to further enhance the golfer’s experience.
Can I use my phone GPS in golf competition? Can I use the phone as a distance-measuring device? Yes. A compass only provided directional information and does not gauge or measure variable conditions or assist the player in his play and is permissible whether or not the Local Rule for distance-measuring devices is in effect.
How do I change the settings on my Bushnell Tour V4?
To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters. When the units you want to use are displayed, release the POWER/FIRE button to select it.
How do you open a Bushnell rangefinder?
Does Bushnell Golf app use data?
Does the Bushnell Golf App Use Data? The Bushnell app runs predominantly through the Bluetooth connection on your phone or smartwatch. To access the GPS functionality and shot management options, you will need to retain the Bluetooth connection throughout your round of golf.
Can you replace battery in Bushnell golf watch?
You can not change the battery. Do not attempt to open, disassemble or service the internal battery. The battery must be replaced by a qualified technician. If you suspect the battery is not working properly please contact Bushnell Golf support.
What is a Bushnell Neo ghost?
The Bushnell Neo Ghost is a wearable mini GPS device that gives a wide range of course information. The first things you notice when you pick it up is how light the 42g device feels and how large the screen is relative to the size of the device.
How do you use the Bushnell Golf App?
How do I connect my Bushnell Bluetooth speaker?
How do you charge a Bushnell Golf speaker?
How do I turn off my Bushnell rangefinder?
Once activated, the display will remain active and display the last distance measurement for about 15 seconds, until the display automatically switches off to extend battery life. You can depress the Fire button again at any time to distance to a new target. To re-fire, press the button down again.
How do you change a Bushnell battery? Remove and discard the red plastic disc covering the positive battery terminal, then replace the battery cover. NOTE: It is recommended that the CR2 3-volt lithium battery be replaced at least once every 12 months. Insert it into the compartment negative end first.
How do I clean my Bushnell rangefinder?
Below are the steps on how to clean a golf rangefinder, in brief.
- Switch the device off.
- Take out the removable parts.
- Remove dirt or dust your hands or an appropriate tool.
- You could improvise DIY tools to remove the sticky dust and dirt.
- Get the right cleaning agent.
- Get a soft cleaning cloth (mostly included)
