Contents
– Hold down the bottom left-hand button and power button together for 15 seconds or until the unit switches off then turn it back on using power button. This will reboot the device and it will no longer be frozen..
Why is my Bushnell Tour V4 not working?
Replace the battery when the unit does not turn on, display does not illuminate, or the display goes blank when attempting to power the laser. Use a good quality 3 -volt lithium battery (CR2). Insert into the compartment with the negative (flat) end first (positive end facing out towards the battery cover).
How do you turn off the slope on a Bushnell Tour V4?
To turn off the slope function just hold down the power button, which will cycle through all of the modes. Once you see yards with no slope meters, release the power button and your device will be legal for tournament play.
How do you change the battery in a Bushnell Tour V4?
How do you turn off a Bushnell rangefinder?
Once activated, the display will remain active and display the last distance measurement for about 15 seconds, until the display automatically switches off to extend battery life. You can depress the Fire button again at any time to distance to a new target. To re-fire, press the button down again.
Does the tour V4 have jolt?
To ping up the strokes, the Bushnell Tour V4 has Jolt technology for vibrating confirmation that you have the flag. It’s awesome and fast to use, but if you have a case of the shakes, you might need to steady yourself.
How do you calibrate a Bushnell Tour V4?
Bushnell Tour v4 rangefinder can be changed from meters to yards by performing a quick calibration. To calibrate the rangefinder, the user will need to push and hold the button for 5 seconds to switch from meters to yards. The unit of measure should be automatically selected after pressing the button for five seconds.
Can I use the Bushnell Tour V4 for hunting?
Bushnell Tour V4 Laser Rangefinder Review Summary
If you’re looking for something you can use any time of the day and enjoy plenty of hunting-friendly features, this isn’t the rangefinder for you. On the other hand, if you want an easy-to-use model that’s simple and straightforward, look no further.
Is Bushnell Tour V4 Waterproof? The Tour V4 slope is water-resistant, whereas Bushnell’s other premium rangefinders (Tour X, Pro X7, Pro X7 Jolt, Tour Z6 Jolt) are rainproof or waterproof.
Why is my Bushnell not working?
BUSHNELL TECHNICAL SUPPORT LASER RANGEFINDERS
If your laser does not turn on or the LCD screen does not illuminate, re-press the POWER/FIRE button. If you are experiencing issues with the unit giving inconsistent distances, not locking on to the pin or not jolting it may be experiencing a battery related issue.
Does the Bushnell Tour V4 have slope?
Bushnell Golf brings you the next evolution of PinSeeker with JOLT in the Tour V4 Rangefinder with Slope. The Tour V4 Slope gives you Bushnell’s patented, Tour trusted Slope Technology, that provides compensated distance based on hole’s incline/decline.
How do you use a Bushnell Tour V4 rangefinder?
How do I change the settings on my Bushnell V4?
MODE and UNIT OF MEASURE OPTIONS
To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters (for details on the Slope feature, see “About Tour V4 Shift with Slope Technology”).
Does Bushnell Tour V4 have slope?
Bushnell Golf brings you the next evolution of PinSeeker with JOLT in the Tour V4 Rangefinder with Slope. The Tour V4 Slope gives you Bushnell’s patented, Tour trusted Slope Technology, that provides compensated distance based on hole’s incline/decline.
How long does a rangefinder battery last? If you play one round of golf each week, the battery should last you seven to nine months. This can vary depending on how much you typically use a rangefinder during the round and if you store the rangefinder in a cold place.
How do I change modes on my Bushnell Tour V4? MODE and UNIT OF MEASURE OPTIONS
To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters (for details on the Slope feature, see “About Tour V4 Shift with Slope Technology”).
How do I change my Bushnell V4 from meters to yards? While looking through the eyepiece, press and hold the POWER button down for approximately 5 seconds. During this time all liquid crystal segments and icons will be displayed. As you continue to depress the power button, the display will toggle back and forth between Yards and Meters.
How do I change the settings on my Bushnell rangefinder?
How do I change the settings on my Bushnell rangefinder? To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters.
How long do Bushnell batteries last for?
It is recommended to replace your Bushnell battery every 12 months.
How do you turn on slope tour V4?
Where is the mode button on a Bushnell rangefinder?
To select between yards and meters, look through the monocular, depress the “mode” button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds.
Why is my rangefinder blurry?
If the reticle appears fuzzy, or requires a little time to come into sharp focus, further adjustment is needed. Turn the eyepiece clockwise another full turn and repeat STEP 8. 8. Keep doing this until the reticle is sharp the instant you put your eye to the scope.
How do I reset my Bushnell wingman?
If necessary, the Wingman can be reset. Make sure the charging cable is not connected. Place a small pin (<3mm) into the reset key (small opening to the right of the USB charging port) and hold it down (press lightly) for 2 seconds until the LED Indicator Ring turns off.
What year did Bushnell Tour V4 come out?
Bushnell says that the Tour V4 will pick out a flag at up to 400 yards and bigger objects like the nearest bar at 1,000 yards.
Bushnell Tour V4 Golf GPS Rangefinder – Product Details.
| UK Launch | 01 June 2016 |
|---|---|
| USA Launch | 01 June 2016 |
| Device Type | Laser |
| Elevation | Yes |
| Shot Measurement | Yes |
• Sep 6, 2016
Is the Bushnell Tour V4 Waterproof? The Bushnell Tour V4 laser also boasts a 5-1,000-yard range (400 yards to a flag), a 5x magnification, a new ergonomic grip, a waterproof case and a two-year warranty.
How do I change my Bushnell rangefinder to FEEt?
To select a different unit of measure, start with the rangefinder powered off. Press and continue to hold the Fire button. “Y”, “M” or “FEEt” will begin flashing, with the display slowly cycling through these 3 unit options (5,7b). Release the Fire button when your desired display units are flashing.
How do I reset my Bushnell Tour v3? Best Answer:
- To reset a Bushnell rangefinder, you will need to remove the battery cover and locate the reset button.
- With the rangefinder facing you, use a pen or other sharp object to push the button in until it clicks.
- Replace the battery cover and try using the rangefinder again.
Can you track a Bushnell rangefinder?
Bushnell is one of the biggest brands in golf when it comes to distance-measuring devices, from laser rangefinders like the new Pro XE, to GPS watches such as the iON2 and the Phantom GPS handheld device.
Bushnell GPS Golf App – Product Details.
| UK Launch | April 2019 |
|---|---|
| Cost | Free |
| Manufacturer’s Website | Bushnell Website |
• May 2, 2019
