Contents
.
Why won’t my Plantronics Bluetooth connect to my phone?
Power the cell phone on again. Pair the headset with your phone again. If the issue persists, try pairing the headset to a different cell phone. If the issue persists, replace the headset.
How do I pair my Plantronics Voyager Bluetooth?
First Time Pairing
- Turn the headset on and then put it on.
- Activate Bluetooth on your phone and set it to search for a new device.
- Select “PLT_Legend.” If your phone asks for a passcode, enter four zeros (0000); otherwise, accept the connection.
- Once successfully paired, you will hear “pairing successful.”
Why is my Plantronics headset not connecting to Iphone?
Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.
Why is my Plantronics headset not working?
Unplug the headset from the PC’s USB port and reboot the computer. Do not just restart – perform a complete system shutdown and then turn back on, as this will help clear the memory in the USB ports. Plug the headset directly into the PC and not into a hub or docking station.
How do I unmute my Plantronics headset?
To mute or unmute your headset, click the headset icon in the System Tray. To mute the device, click Mute. The headset icon turns red to indicate the device is muted.
How do I fix my Plantronics Bluetooth?
How to Fix a Plantronics Bluetooth
- Charge your headset’s battery.
- Reboot your devices.
- Uninstall problematic software.
- Make sure your phone’s Bluetooth settings are correctly enabled.
- Rule out radio interference.
- Call Plantronics directly.
How do I reset my Plantronics 8200?
Plantronics Headset Reset For Savi 700, Savi 400 and 8200 Series
- Unplug the AC power from your Plantronics charging base.
- Remove your battery (W730, W430 battery can’t be removed)
- Wait 10 seconds then replug both the AC power and battery in like normal.
- Place your headset in the charging base.
How do I pair my Plantronics Voyager 8200? To put your headset in pair mode, slide and hold the Power switch away from the off position until you hear “pairing” and the headset LEDs flash red and blue. NOTE *Menus may vary by device. Select “Poly V8200 Series.” Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.
How do I reset my Plantronics Voyager Pro?
Hold the headset by the microphone (like a lollipop, as shown below) for five seconds. To perform a full reset of the sensors: Connect the headset to its charger. Place the headset on a flat, nonmetallic surface for 10 seconds.
How do I unpair my Plantronics Voyager Legend?
Turn on the headset. (When on, there will be a blinking blue light in microphone boom.) Step 2. Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out.
How do I reset my Plantronics Voyager UC?
Reset sensors
Choose: With your headset powered on, charge your headset on the charge stand for 10 seconds. Press and hold both the Mute and Play/pause buttons for more than 4 seconds until the LEDs flash purple twice, being careful to not touch the earcup padding or allow it to come in contact with surfaces.
How do I reset my Plantronics base station?
On the back of the main base, Press and hold the + and – buttons until the red power light on the front of the base starts to flash. Release the buttons on the back. Press and hold the black mute wheel in on the headset until you see a green light come on the headset.
How do I reset my Plantronics d100?
Press and hold the volume down control on your Savi W440 wireless headset until a white LED appears, then release. If the white LED doesn’t come on after 5-10 seconds, try holding the volume control up instead.
How do I pair my Plantronics Voyager Legend? Go to Settings menu on the Android phone. Ensure Bluetooth is enabled, and then tap Bluetooth to access the settings. Tap Search or Scan (depending on the phone) so the phone can locate the headset. Once the phone finds the headset, tap PLT_Legend to complete the pairing process.
Why does my Plantronics headset keep muting? Disconnect the headset, and then reconnect it to see if this reactivates the mute switch. If so, then you might have insufficient USB power. You could be missing a driver. Go to your Device Manager (instructions below) and look for the Human Interface Device.
How do I reset my Plantronics Voyager Edge?
To reset your sensors, connect the headset directly to your computer’s USB port, and place it, with the eartip up, on a flat non-metallic surface for more than 10 seconds. To disable the sensors, hold both the Voice and Call buttons for more than 6 seconds until the LED flashes purple then red.
How do I factory reset my Plantronics Voyager?
Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out. Step 3 Wait 1 minute for the reset to power down the software and clear firmware.
How do I put my Voyager 5200 in pairing mode?
Press and hold the Call button until you hear “pairing.” While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices. Select “Poly V5200 Series.” Once successfully paired, indicator lights will stop and you will hear “pairing successful.”
How do I pair my Plantronics Voyager Pro?
Press and hold the power button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the power button and set the headset aside. On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset.
How do I pair my Plantronics Voyager 4220?
Put your base into pair mode by pressing and holding the Bluetooth pairing button on the back of your base for 2 seconds until the display panel’s Bluetooth icon flashes blue and red. Pairing is successful when you hear “pairing successful” and “base connected” and the display panel’s Bluetooth icon turns solid blue.
How do I put my Bluetooth headset in pairing mode?
Activate Pairing mode on the Bluetooth headphones. Press and hold the Power button or the ID SET button, as shown in the illustration below. When the indicator starts to blink quickly, release the button. The blinking means the Bluetooth headphones have entered Pairing mode.
How do you fix unsuccessful pairing?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and choose Forget This Device for each device) then restart your phone or tablet.
How do I pair my Plantronics Bluetooth headset to my iPhone? To pair your Plantronics Bluetooth headset with your iPhone:
- On your iPhone, press Settings > General > Bluetooth.
- If Bluetooth is turned Off, tap to turn it On.
- Place your Bluetooth headset into pairing mode.
- When you see your Plantronics device name, tap it to pair and connect.
