How do I login to my Harmony account?

If you’re using the Harmony mobile app, then tap the MENU icon in the upper left corner. Followed by HARMONY SETUP > ADD/EDIT DEVICES & ACTIVITIES. It will take to Logi ID page in a browser, enter the credentials to log in to your Harmony account..

Why is Logitech discontinuing Harmony?

Harmony Link users were outraged in late 2017 when Logitech announced that it would deactivate all services for product because it was moving to a new product called Home Hub.

How do I access my Harmony Hub remotely?

Using the Harmony app

1. Navigate to MENU, then select Harmony Setup > Add/Edit Devices > REMOTE & HUB.
2. Select REMOTE & HUB (or HUB) and then press the IR ASSIGNMENTS button.
3. Select the device that you would like to change how Harmony controls it.
4. Select how you would like to control the device.

How do I reset my Harmony Hub?

Harmony Hub

Unplug your hub and then hold the Pair/Reset button on the back while plugging it back in. The light on the front of the hub will flicker red for approximately 30 seconds as the hub restores itself to factory defaults.

How do I connect my Harmony Hub to my computer?

Ensure your hub is plugged into a power outlet and connect your remote to your computer using a USB cable. Harmony will scan available networks and you’ll be prompted to select one. Select your preferred network. If applicable, enter your password and click Connect.

Why is my Harmony Hub blinking red?

If syncing from myharmony.com, the LED will turn red when receiving an update. The Harmony Ultimate remote or Harmony app may have initiated a firmware or user configuration update. Firmware and user configuration updates may take up to 5 minutes. The LED will blink red rapidly when firmware is being installed.

Do I need to update my Harmony remote?

Do I Need To Update My Harmony Remote? – upgrading to our current setup and configuration software, MyHarmony, is strongly recommended. The devices, Activities, any taught IR commands, configurations made to your device delay or device input settings will be copied to your new remote.

What is the latest version of Harmony hub?

Harmony Hub firmware (v4. 15.206)

Why is my Harmony Hub red? The Harmony hub solid Red light happens when the harmony hub is not available, most commonly because it is either syncing with the cloud account or downloading a firmware update or your Wi-Fi is offline.

How do I unlock my Harmony account?

Reset your password

1. When the Harmony app prompts for your login credentials, select Forgot Password?
2. Enter the email address used to set up your Harmony remote.
3. An email will be sent to this address with instructions to reset your password. If you haven’t received one, look in other folders to get the email.

Can I control Harmony Hub remotely?

CONTROL IT ALL VIA SMARTPHONE OR TABLET

Harmony Hub turns your smartphone or tablet into a universal remote, giving you control over your home entertainment and smart home devices.

How do I find the IP address of my Harmony Hub?

How do I find the IP address of my Harmony Hub?

1. Open the Logitech Harmony app on your smartphone or tablet.
2. Click on the icon in the upper left-hand corner of your screen.
3. Click on “My Devices” and you should see a list of devices with their assigned IP addresses.

How do I update my Harmony Hub?

Updating your firmware

1. Launch the Harmony app and sign into your account.
2. Select your Harmony remote, then select the sync icon in the upper right corner. You may need to connect your remote to the computer for this step.
3. Follow the on-screen prompts to finish updating your firmware.

What is Myharmony app?

Harmony Mobile Apps. Use the Harmony app for iOS or Android to set up and configure your Harmony. Once setup, use the app as a complementary control for your entertainment system.

How do I update my Logitech Harmony remote? Updating your firmware

1. Launch the Harmony app and sign into your account.
2. Select your Harmony remote, then select the sync icon in the upper right corner. You may need to connect your remote to the computer for this step.
3. Follow the on-screen prompts to finish updating your firmware.

How do I reset my Harmony app?

How do you pair Harmony? How to re‑pair the hub with your remote or keyboard

1. Ensure the hub is powered. Wait 30 seconds after first connecting it to a power supply.
2. Press the Pair/Reset button on the back of the hub.
3. Depending on your Harmony product: Harmony Pro, Elite, and Smart Control remotes: Press the Menu & Mute buttons at the same time.

Can’t connect to Harmony hub?

If Harmony Hub isn’t discovering or connecting to your Wi‑Fi network, try the following: Ensure your Wi-Fi password doesn’t contain an emoji — they are not supported by Harmony. Unplug the hub from the power adapter, wait 10 seconds and then plug it back in. The Hub will take 30 seconds to power on.

How do I find my Harmony Hub IP address?

How do I find the IP address of my Harmony Hub?

1. Open the Logitech Harmony app on your smartphone or tablet.
2. Click on the icon in the upper left-hand corner of your screen.
3. Click on “My Devices” and you should see a list of devices with their assigned IP addresses.

Can I control my Harmony Hub from my PC?

Your Harmony Hub should pair with your Windows PC and you’ll get a success message on both your PC and your tablet. From there, you can map the buttons on your remote just like any other device through the Harmony app on your phone or tablet, or the MyHarmony app on your desktop.

Why is my Harmony app not working?

Restart/reboot your Harmony remote (and hub), mobile device and Wi‑Fi router. For mobile devices, turn off then back on (or toggle) Wi‑Fi as well as Bluetooth. Make sure the Harmony mobile app and hub are on the same Wi‑Fi network.

How do I pair my device with Harmony app?

Connect to your Harmony hub using the Harmony mobile app. Then select Harmony Setup > Add/Edit Devices & Activities > DEVICES from the menu. To add a device, click ADD DEVICE at the bottom of the screen. You will need to enter the manufacturer and model number of the device you wish to add.

Does Harmony Hub work without Internet?

No, Wi-Fi is needed for the Hub to work. and since the Smart control is only RF, you would not be able to contol any devices without the Hub being powered on and connected to Wi-Fi, as the Hub sends IR to the devices.

Does Harmony remote have Bluetooth?

With Harmony Hub, you can control your home entertainment and home automation systems from anywhere. You can control your various devices using Infrared (IR), Bluetooth, and Wi*Fi, which is placed near your television, cable/satellite box, game console, and other equipment.

What does red light on Harmony Hub mean? The Harmony hub solid Red light happens when the harmony hub is not available, most commonly because it is either syncing with the cloud account or downloading a firmware update or your Wi-Fi is offline.

Does Harmony remote use Bluetooth?

Harmony Hub will control PlayStation 3 and PlayStation 4 using both Bluetooth for powering on/off (not supported on PS4) and the USB receiver for text entry.

Why is my Logitech remote not working? To reboot your Harmony blaster, disconnect the power cable and wait 10 seconds, then connect it again. It will take about 30 seconds to power back on. The following tips may also be helpful: If your remote is blinking red, it needs to be charged until the light turns solid white.

How do I set up Logitech Harmony?

Mobile Desktop

1. Launch the Harmony app and connect to your Harmony hub.
2. Select MENU, then Harmony Setup > Add/Edit Devices & Activities > DEVICES.
3. Select the ADD DEVICE button at the bottom of the screen.
4. Press SCAN FOR WI‑FI DEVICES to auto-detect any devices.

What is my Harmony app? Control your home from your Android smartphone or tablet. Dim the lights, close the blinds, crank the volume, and start the movie— with one touch. Streamline your life using personalized, multi-device Activities.

Does Harmony Hub work through walls? Harmony Express Blaster

IR signals will bounce off of cabinet doors and walls, but will not pass through them. Placement only needs to be considered for devices that are controlled via IR, devices controlled via Wi‑Fi and/or Bluetooth does not rely on your Blaster’s placement.