How do I change the settings on my Bushnell V4?

MODE and UNIT OF MEASURE OPTIONS

To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters (for details on the Slope feature, see “About Tour V4 Shift with Slope Technology”)..

Where is the mode button on a Bushnell rangefinder?

To select between yards and meters, look through the monocular, depress the “mode” button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds.

How do you turn off a Bushnell rangefinder?

Once activated, the display will remain active and display the last distance measurement for about 15 seconds, until the display automatically switches off to extend battery life. You can depress the Fire button again at any time to distance to a new target. To re-fire, press the button down again.

How do you turn off a Bushnell?

Press and hold (7 sec.) to power ON/OFF.

How do you turn off the slope on a Bushnell rangefinder?

To turn off the slope function just hold down the power button, which will cycle through all of the modes. Once you see yards with no slope meters, release the power button and your device will be legal for tournament play.

How do you turn on a Bushnell Golf?

To activate Play Golf Mode, press the GOLF MENU button (1), then select PLAY GOLF (Fig. 6). The Neo iON will search for a satellite signal, and upon acquisition will yield a list of local course results, with the nearest course at the top.

How do you change a Bushnell battery?

Remove and discard the red plastic disc covering the positive battery terminal, then replace the battery cover. NOTE: It is recommended that the CR2 3-volt lithium battery be replaced at least once every 12 months. Insert it into the compartment negative end first.

How do you use a Bushnell rangefinder?

What is the visual jolt indicator ring? The JOLT feature of previous Bushnell rangefinders has been enhanced with a new ‘Visual JOLT’ feature. A red ring now flashes as JOLT vibrates to give the golfer even greater feedback and confidence to know you have locked onto the flag.

How do you change the slope on a tour V4?

On the Tour V4 Slope the function is disabled by clicking and holding the main power button on top to change the settings to make it legal for use in tournament play.

How do you focus a Bushnell rangefinder?

Turn the eyepiece, counter clockwise, until the reticle appears slightly blurred. 5. Turn the eyepiece, clockwise, until the reticle comes into focus.

Can you turn off slope on Bushnell V4?

To turn off the slope function just hold down the power button, which will cycle through all of the modes. Once you see yards with no slope meters, release the power button and your device will be legal for tournament play.

How do you turn off slope?

Golfers can simply move the switch to its top position to activate the slope function or slide the switch to the bottom position to disable it.

How do you use the Bushnell golf App?

How do I calibrate my Bushnell Tour v3? To calibrate the rangefinder, the user will need to push and hold the button for 5 seconds to switch from meters to yards. The unit of measure should be automatically selected after pressing the button for five seconds. How do you turn on a Bushnell Tour v3?

How do you turn on the slope on a Bushnell? 7. Slide Slope Switch to left (red indicator visible) to enable slope compensated ranging, slide it to the right (red indicator hidden) to disable slope. 8. With slope mode enabled, tap Mode button to toggle Elements on/off, indicated by the Elements mode icon in the display.

Is Bushnell Tour V4 Waterproof? The Tour V4 slope is water-resistant, whereas Bushnell’s other premium rangefinders (Tour X, Pro X7, Pro X7 Jolt, Tour Z6 Jolt) are rainproof or waterproof.

Does the Bushnell Tour V4 have slope?

Bushnell Golf brings you the next evolution of PinSeeker with JOLT in the Tour V4 Rangefinder with Slope. The Tour V4 Slope gives you Bushnell’s patented, Tour trusted Slope Technology, that provides compensated distance based on hole’s incline/decline.

How do you change the slope on a rangefinder?

Adjust the focus of the rangefinder by rotating the dial left or right until the display appears sharp. 4. If slope is on (M2), the slope-adjusted distance will appear above the crosshair. The non-slope distance will appear below the crosshair.

Is the Bushnell Tour V4 Waterproof?

The Bushnell Tour V4 laser also boasts a 5-1,000-yard range (400 yards to a flag), a 5x magnification, a new ergonomic grip, a waterproof case and a two-year warranty.

Does the tour V4 have jolt?

To ping up the strokes, the Bushnell Tour V4 has Jolt technology for vibrating confirmation that you have the flag. It’s awesome and fast to use, but if you have a case of the shakes, you might need to steady yourself.

Why is my rangefinder blurry?

If the reticle appears fuzzy, or requires a little time to come into sharp focus, further adjustment is needed. Turn the eyepiece clockwise another full turn and repeat STEP 8. 8. Keep doing this until the reticle is sharp the instant you put your eye to the scope.

How do I reset my Bushnell wingman?

If necessary, the Wingman can be reset. Make sure the charging cable is not connected. Place a small pin (<3mm) into the reset key (small opening to the right of the USB charging port) and hold it down (press lightly) for 2 seconds until the LED Indicator Ring turns off.

How do you turn off the slope on a Bushnell Tour v5?

How do you set up a Bushnell Golf? To access the Setup Menu, select Setup from the Golf Menu. Use the UP Button (3) and the Down Button (5) to scroll between options. Use the Select Button (4) to select the desired option. Select YDS/M to set your preference for unit of measurement in Play Golf Mode.

What battery does the Bushnell Tour V4 use?

BatteryGuy 3 Volt 750 mAh replacement battery for Bushnell Tour V4.

Technical Specifications.