Contents
The TOUR V3 can be used to measure distances in yards or meters. The unit of measure indicators are located in the lower right portion of the LCD. To select between yards and meters, press and hold the POWER/FIRE button..
How do I change the settings on my Bushnell rangefinder?
How do I change the settings on my Bushnell rangefinder? To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters.
How do I convert my Bushnell rangefinder to yards?
To select between yards and meters, look through the monocular, depress the “mode” button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds.
How do you use a Bushnell Tour v3 rangefinder?
How do you reset a Bushnell Tour V3?
How do you reset the Bushnell Tour V3 from Yards? Resetting a Bushnell rangefinder is an easy process that you can do yourself. Press the “Clear” button to reset the Bushnell.
Why is my Bushnell range finder not working?
BUSHNELL TECHNICAL SUPPORT LASER RANGEFINDERS
If your laser does not turn on or the LCD screen does not illuminate, re-press the POWER/FIRE button. If you are experiencing issues with the unit giving inconsistent distances, not locking on to the pin or not jolting it may be experiencing a battery related issue.
How do I clean the lens on my Bushnell rangefinder?
Simply breathe lightly on the lens to provide a slight amount of moisture, then gently rub the lens with the microfiber cloth. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used.
Where do I send my Bushnell scope for repair?
Bushnell Outdoor Products, ATTN: Lab Repair, 9200 Cody, Overland Park, KS, 66214.
What is a slope switch on a golf rangefinder? A slope edition rangefinder gives you the distance to the flagstick, and the degree of elevation to the target. The change in elevation (Slope) will give you a ‘Play like’ yardage, so you can calculate the right club for the shot based on the yardage and slope.
How do you activate the jolt on a Bushnell V3?
You have to press and hold the power button and look through the viewfinder until the mode “w/jolt” appears. It takes 5-10 seconds of holding before it starts to cycle through the different modes.
How do I change my rangefinder from meters to yards?
After turning the rangefinder one. Hold the MODE button for about 1 second and then it will toggle between Yards and meters. Let off the button when it is on the one you desire.
Why is my Bushnell Tour V3 not working?
Your Bushnell rangefinder has stopped working because it is probably just dirty and needs to be cleaned. You can clean your rangefinder by going into the menu settings and finding “clean.” The instructions will tell you how to proceed from there.
How do you turn on the slope on a Bushnell?
What is Slope switch on a rangefinder?
More specifically, the slope feature on rangefinders detects elevation changes to provide accurate adjustments to the shot distance needed to reach the green.
How do you reset a rangefinder? How Do I Reset My Bushnell Rangefinder
- Remove the battery cap on the back of the unit.
- Take out the battery and put it back in again.
- Turn on your device by pushing down on both buttons at once for 2 seconds.
Why is my Bushnell rangefinder not working? BUSHNELL TECHNICAL SUPPORT LASER RANGEFINDERS
If your laser does not turn on or the LCD screen does not illuminate, re-press the POWER/FIRE button. If you are experiencing issues with the unit giving inconsistent distances, not locking on to the pin or not jolting it may be experiencing a battery related issue.
Why is my rangefinder blurry? If the reticle appears fuzzy, or requires a little time to come into sharp focus, further adjustment is needed. Turn the eyepiece clockwise another full turn and repeat STEP 8. 8. Keep doing this until the reticle is sharp the instant you put your eye to the scope.
Does the Bushnell Tour V3 have slope?
This Bushnell Tour V3 Slope goes a step further with Slope Technology for those inevitable inclines and declines on a refreshing unpredictable course. And, with the standard Bushnell PinSeeker and JOLT technologies behind your back, no distance will be beyond you.
How do you calibrate a Bushnell rangefinder?
Bushnell Tour v4 rangefinder can be changed from meters to yards by performing a quick calibration. To calibrate the rangefinder, the user will need to push and hold the button for 5 seconds to switch from meters to yards. The unit of measure should be automatically selected after pressing the button for five seconds.
How do I change my golf rangefinder from meters to yards?
After turning the rangefinder one. Hold the MODE button for about 1 second and then it will toggle between Yards and meters. Let off the button when it is on the one you desire.
Why is my Bushnell not working?
BUSHNELL TECHNICAL SUPPORT LASER RANGEFINDERS
If your laser does not turn on or the LCD screen does not illuminate, re-press the POWER/FIRE button. If you are experiencing issues with the unit giving inconsistent distances, not locking on to the pin or not jolting it may be experiencing a battery related issue.
How do you reset a Bushnell Tour V4 rangefinder?
To reset a Bushnell Tour V4 rangefinder, first turn it off. Next, hold down the power button for about 5 seconds until the rangefinder beeps. Then release the button and press it again. The rangefinder should now be reset.
How do you change from meters to yards on the Bushnell Tour V4?
While looking through the eyepiece, press and hold the POWER button down for approximately 5 seconds. During this time all liquid crystal segments and icons will be displayed. As you continue to depress the power button, the display will toggle back and forth between Yards and Meters.
How do I reset my rangefinder?
– Hold down the bottom left-hand button and power button together for 15 seconds or until the unit switches off then turn it back on using power button. This will reboot the device and it will no longer be frozen.
How do I change my Bushnell Tour v2 from meters to yards? To select between yards and meters, quickly press and release the POWER button to turn on the unit (on top of the unit), look through the eyepiece, depress the “MODE” button (left side of the eyepiece) and hold it down for approximately 5 seconds.
How do you change from meters to yards?
Multiply the number of meters by 1.0936 to get the number of yards. There are 1.0936 yards in every meter. So if 1 meter is 1.0963 yards, then 2 meters is 2.1872 yards, and so on.
How do I change my Bushnell Hybrid from meters to yards? UNIT OF MEASURE (YARDS/METERS)
To select your preferred units, start with the unit powered off. Press and hold down the Power/FIRE button until you feel the “Jolt” vibration (about 7 seconds)-the “Y” (Yards) will blink. Continue to hold the FIRE button until you see the units switch to “M” (meters), then release it.
How do you turn off slope?
Golfers can simply move the switch to its top position to activate the slope function or slide the switch to the bottom position to disable it.
