How deep is the water in a 52 inch pool?

by Maria Feer

Wall Height

Many people wished they were deeper so the manufacturers started making 52 inch tall pools so that they would hold nearly 4 feet of water at 3′ 10”. Now the most popular pools are 54” tall and they can actually hold 4′ of water..

How deep in the ground can you put an above ground pool?

Basically, if the depth around the edges is 4 feet, the recommended middle depth is 5 feet. If that middle depth isn’t quite enough, don’t worry. Expandable liners are the go-to choice when above ground pool depth is a necessity.

How do I level my ground for a pool without digging?

Can I partially bury an above ground pool?

And for this reason, many people ask, “Can above ground pools be partially buried?” in hopes of receiving the best of both worlds. The short answer is that “Yes, they can!” However, there are some things that should be taken into account if you’re going to go down this route.

Should I put dirt around my above ground pool?

Do not attempt to install an above-ground pool below ground where all sides of the pool are surrounded by dirt. The weight of the soil when it becomes saturated with water will cause the walls to collapse. Professional excavation is recommended if more than a few inches of slope must be removed for the pool to fit.

Do above ground pools add value to a home?

An above ground pool may provide lots of fun for the kids or perhaps even for you, but do not expect it to add value to your home. Even the top of the line versions is still considered undesirable for most any home buyer.

Can you make an above ground pool look like an inground pool?

While above ground pools can look tacky without the proper deck, they can look just as nice as an inground pool when attention to certain details are applied.

Can you backfill an Intex pool?

As long as the pool is filled with water, backfilling cannot harm the pool.

What do you put around the base of an above ground pool? Using gravel or rock is one of the most popular ways when landscaping around your above ground pool. These rocks are readily available and suitable for all climates. They range in sizes, shapes and colors so you can always find the style you need to compliment the rest of your yard.

What is the most popular size above ground pool?

Round pools start at 12 feet in diameter, with 24-foot-diameter pools, which can fit four to five people, being the most popular choice, Carnes says. The most popular oval pools are 15 feet by 30 feet.

How long before you can swim in a new above ground pool?

After Shocking Your Pool

It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!

How many hours does it take to install an above ground pool?

The Installation Process

The installation of an above ground pool can generally be completed by an experienced pool installation crew in about 4-6 hours.

Do above ground pools decrease home value?

An above ground pool may provide lots of fun for the kids or perhaps even for you, but do not expect it to add value to your home. Even the top of the line versions is still considered undesirable for most any home buyer.

How long does it take for an above ground pool to settle?

a 3 ft deep hole filled with soil is likely to settle considerably. Maybe even a good bit more than 6 or 8 inches, depending on how well (if any) it was compacted during the back filling. If you can stand it, wait a couple of months (preferably more) and let it settle really well.

Can you put an above ground pool on grass? While you could place your pool directly on top of your grass, that isn’t the best idea. The grass isn’t a firm base since it is alive and growing. Your pool can shift over time and settle into an unfavorable and potentially dangerous position.

How long can water sit in pool without chlorine? I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.

How do I prepare my yard for an above ground pool? How to Prep Ground for an Above-Ground Pool

  1. Choose the best area of your yard to set up your pool.
  2. Remove all sod and other vegetation from the area.
  3. Determine the lowest point of the pool area.
  4. Create a wood level.
  5. Replace the metal stake with a 2-inch square wooden stake hammered flush with the ground.

What height above ground pool is the best?

Well, many people like the deeper 52″ above ground pool better because more water usually offers better swimming. However, some prefer the smaller height of the 48″ above ground pools because a lower depth may be safer for young children.

How long does it take to install an above ground pool?

The installation of an above ground pool can generally be completed by an experienced pool installation crew in about 4-6 hours.

How much space do you need for an above ground pool?

Most above ground pools require an extra three feet of clearance on each side (or all the way around) to accommodate the supportive uprights. For example, an 18 food round swimming pool will require a total of 24 feet of space.

How do you prepare the ground for an above ground pool?

How to Prep Ground for an Above-Ground Pool

  1. Choose the best area of your yard to set up your pool.
  2. Remove all sod and other vegetation from the area.
  3. Determine the lowest point of the pool area.
  4. Create a wood level.
  5. Replace the metal stake with a 2-inch square wooden stake hammered flush with the ground.

What happens if Intex pool is not level?

Unlevel Intex pools may have one part of the pool lower than other parts, and this unevenly distributes pressure on your pool’s walls. A part of your pool may have the highest weight due to it being on uneven ground. This will can cause your wall to collapse and leave permanent damage on your Intex pool.

Can I put a pool on uneven ground?

Installing a pool on uneven ground creates a safety hazard. You’ll end up with a shallow and a deep end, which can be dangerous to smaller children if they cannot touch the bottom.

How do I prepare my yard for an above ground pool?

Preparing a Spot for Your New Above Ground Pool

  1. MARK THE AREA.
  2. REMOVE THE TURF.
  3. HAVE SAND DELIVERED.
  4. CHECK LOCAL FENCING LAWS.
  5. STAKES & STRINGS.
  6. GETTING LEVEL GROUND.
  7. PAVER PLACEMENT.
  8. BRING IN THE SAND.

What is a good size deck for above ground pool? A good rule of thumb is for a deck’s square footage to be at least the same as your pool’s square footage. To illustrate with a simple example, say a rectangle pool is 15 feet wide by 30 feet long. With a 450-square-foot pool, the deck should also be at least 450 square feet.

Related Posts

Leave a Comment