Contents
The Tour v3 introduces Bushnell’s JOLT technology, which provides short bursts of vibration to indicate that its PinSeeker technology has locked onto a target. The JOLT technology may not be for everyone, but if you don’t like it, you can turn it off – we found ourselves appreciating it more over time..
How do I update my Bushnell?
Once your device is registered, log into the https://bushnell.igolf.com/ website and connect your device. The website should have you download the installer program and update your device. The device update can take up to 45 minutes.
How does Bushnell jolt work?
JOLT Technology generates two short vibrations to confirm that the distance displayed is to the flag (closest object), and the Visual JOLT red indicator ring in the display illuminates.
What is iGolf Sync app?
iGolf Connect® is a content delivery platform that supplies golf course information and GPS content to application developers, connected hardware manufacturers and website operators.
How do I connect my Bushnell Golf?
Advanced Instructions – Initial Pairing For Android:
- Restart the phone (initial pairing only).
- Start with both the speaker and remote turned OFF.
- Go to the Bluetooth settings on your phone.
- Look at the previously paired Bluetooth devices.
- Open the Bushnell app on your phone.
- Select Add New Device.
What is a Bushnell Neo ghost?
The Bushnell Neo Ghost is a wearable mini GPS device that gives a wide range of course information. The first things you notice when you pick it up is how light the 42g device feels and how large the screen is relative to the size of the device.
How do you turn on a Bushnell rangefinder?
Press Power/Fire button to activate display and fire laser. Display remains active for 10 seconds. 3. Adjust Eyepiece Diopter Dial, rotating it until display appears sharp.
How do you use the Bushnell Golf App?
How do you charge a Bushnell rangefinder? To charge the battery, pull the rubber cover-up from the USB port on the back of the unit (12). Connect the provided USB cable. Connect the other end of the cable to any standard smartphone charger and plug it into an AC outlet (110-120 volt).
How do you use a Bushnell Tour V3 rangefinder?
How do you turn on the slope on a Bushnell?
How do I change my V4 from meters to yards?
To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters (for details on the Slope feature, see “About Tour V4 Shift with Slope Technology”).
How do I change my Bushnell Tour v2 from meters to yards?
To select between yards and meters, quickly press and release the POWER button to turn on the unit (on top of the unit), look through the eyepiece, depress the “MODE” button (left side of the eyepiece) and hold it down for approximately 5 seconds.
Where is the mode button on a Bushnell rangefinder?
To select between yards and meters, look through the monocular, depress the “mode” button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds.
What is a slope switch on a golf rangefinder? A slope edition rangefinder gives you the distance to the flagstick, and the degree of elevation to the target. The change in elevation (Slope) will give you a ‘Play like’ yardage, so you can calculate the right club for the shot based on the yardage and slope.
How do you change from meters to yards on the Bushnell Tour V4? While looking through the eyepiece, press and hold the POWER button down for approximately 5 seconds. During this time all liquid crystal segments and icons will be displayed. As you continue to depress the power button, the display will toggle back and forth between Yards and Meters.
How do you reset a Bushnell Tour V4 rangefinder? To reset a Bushnell Tour V4 rangefinder, first turn it off. Next, hold down the power button for about 5 seconds until the rangefinder beeps. Then release the button and press it again. The rangefinder should now be reset.
How do I change my Bushnell Tour V3 rangefinder from meters to yards?
The TOUR V3 can be used to measure distances in yards or meters. The unit of measure indicators are located in the lower right portion of the LCD. To select between yards and meters, press and hold the POWER/FIRE button.
How do I adjust my Bushnell Tour V4?
ADJUSTING THE EYEPIECE
Your TOUR V4 SHIFT is constructed with an adjustable eyepiece (+/- 3 Diopter Adjustment) that allows one to focus the LCD display relative to the image. Simply rotate the eyepiece until the reticle and object distanced to are both in focus to your eye.
How do I change my Bushnell Pro XE from meters to yards?
You can turn on Elements Mode with a single touch of the Mode button. Holding Mode brings up the menu for adjusting brightness and toggling between yards and meters.
How long do Bushnell batteries last for?
It is recommended to replace your Bushnell battery every 12 months.
How do you turn off a Bushnell?
Press and hold (7 sec.) to power ON/OFF.
How do I setup my Bushnell rangefinder?
Does Bushnell Golf app use data?
Does the Bushnell Golf App Use Data? The Bushnell app runs predominantly through the Bluetooth connection on your phone or smartwatch. To access the GPS functionality and shot management options, you will need to retain the Bluetooth connection throughout your round of golf.
Can you replace battery in Bushnell golf watch? You can not change the battery. Do not attempt to open, disassemble or service the internal battery. The battery must be replaced by a qualified technician. If you suspect the battery is not working properly please contact Bushnell Golf support.
