Can you pair 2 phones to Uconnect?

More than one phone or device can be paired to your vehicle. The connected device with the highest priority will be used. To transition between devices, Select Phone > Settings > Phone/Bluetooth®, then touch the desired device. Multiple devices may be connected at one time..

How do I add a new device to Uconnect?

Enable Bluetooth on your phone and select the option to search for new devices. Your phone should display “Uconnect” in the Bluetooth menu. Select “Uconnect” and enter the system’s PIN. Uconnect should announce “pairing complete.” Your phone is now paired.

Where is my Uconnect PIN?

Your Bluetooth^TM Hands-Free Profile wireless phone will search for the UConnect® kit (please allow up to 30 seconds for the search). When prompted for the 4-digit passcode, enter “0000” then press SEND/YES on your wireless phone. Wait for the system prompt.

Why will my phone not connect to Uconnect?

Your phone can still be connected manually. Phone won’t pair to system • Perform a hard reset in the phone by removing the battery (if removable – see your phone’s owner manual). Delete pairing history in phone and Uconnect system; usually found in phone’s Bluetooth connection settings.

How do I pair my iPhone with Uconnect?

On the Uconnect system, press MENU . Choose SYSTEM SETUP . Select DEVICE PAIRING . Choose PAIRED DEVICE .

iPhone 6S and 6S Plus pairing instructions:

1. Select BLUETOOTH.
2. Switch Bluetooth toggle to ON.
3. Select UCONNECT in devices list.
4. Enter the PIN created for the Uconnect system.
5. Select PAIR.

How do you reset the UConnect on a 2015 Dodge Challenger?

How do you reset the UConnect on a 2014 Chrysler 300?

Have Service Professionals Upgrade Your Uconnect® System

1. With the car in park, turn the ignition on to “Run.”
2. While doing this, simultaneously press and hold the volume knob and tuner knob at the same time for about 10 to 20 seconds.
3. If done correctly, the display will flash your vehicle’s brand and attempt to restart.

How do I reconnect Uconnect?

All you need to do is follow these instructions:

1. Press your vehicle’s Uconnect button.
2. After the voice prompt, say “setup” and then “phone pairing.”
3. Say “pair a phone,” then enter the four-digit PIN for your UConnect system (find this in your vehicle’s manual).
4. Say “yes” to confirm your PIN.

How do you soft reset UConnect Jeep Cherokee? For the latest Uconnect® version 8.4, this is how you can perform a soft reset of the system:

1. Turn your key in the ignition to “Run,” but leave the car in park.
2. Simultaneously press the volume button and the tuner knob at the same time.
3. Continue pressing them down for 10 – 20 seconds.

How do I reset Uconnect?

How do I reset my Uconnect 2014?

Uconnect® Hard Reset Procedure

1. Press the hot and coup up and down buttons simultaneously for at least five seconds.
2. Scroll through the menu that pops up and select the choice prompting you to reset factory defaults.
3. Once selecting this option, wait roughly 30 seconds while the system reboots.

How do I fix my Uconnect Bluetooth?

If your Uconnect Bluetooth isn’t connecting, try these troubleshoot tips to fix the problem:

1. Restart your phone.
2. Delete pairing history in Uconnect and phone settings.
3. Make sure the phone is set to “discoverable.”
4. Check for a software update.
5. Reset Uconnect.
6. Check if Uconnect is connected to another device.

How do I reset the Bluetooth in my Jeep Grand Cherokee?

Soft resetting will help update the system quickly. Switch on both Your car (in Park mode) and infotainment system. Press and hold down the upper rightmost corner of Your infotainment screen until it switches off. This usually takes around 10 to 17 seconds.

How do I reset my Bluetooth in my Jeep?

Soft Reset Uconnect

Press and hold down the upper rightmost corner of your infotainment screen until it switches off. This usually takes around 10 to 17 seconds. What is this? Once it switches off, remove your finger from the screen and wait for the Jeep logo to appear and then reappear.

How do you reset the UConnect on a 2017 Jeep Wrangler? Resetting the Jeep Wrangler UConnect Radio System

1. Start your vehicle and press down on the ‘voice recognition’, and ‘phone’ buttons located on the steering wheel.
2. Turn off your vehicle and wait for the UConnect display to go completely black.
3. Afterwards, open and close the driver’s door and restart the vehicle.

How do you reset the Uconnect on a Chrysler Town and Country? With the car in park, turn the ignition on to “Run.” While doing this, simultaneously press and hold the volume knob and tuner knob at the same time for about 10 to 20 seconds. If done correctly, the display will flash your vehicle’s brand and attempt to restart.

How do you reset the Uconnect on a 2017 Jeep Wrangler? Resetting the Jeep Wrangler UConnect Radio System

1. Start your vehicle and press down on the ‘voice recognition’, and ‘phone’ buttons located on the steering wheel.
2. Turn off your vehicle and wait for the UConnect display to go completely black.
3. Afterwards, open and close the driver’s door and restart the vehicle.

Why wont my Uconnect connect?

Perform a hard reset in the phone by removing the battery (if removable – see your phone’s owner’s manual). Delete the pairing history in your phone and Uconnect® system, which is usually found in the phone’s Bluetooth® settings. Verify you are selecting “Uconnect” in the discovered Bluetooth devices on your phone.

How do I reset my Uconnect password?

Reset your password:

1. Navigate to the login screen, input your email/username, then when prompted to input your password, select Forgot Password under the username and password fields.
2. Enter your username or email, which will send a ‘reset password’ link to your email.
3. Login to your email account and follow the link.

How do you set up Uconnect?

Enable Bluetooth on your phone and select the option to search for new devices. Your phone should display “Uconnect” in the Bluetooth menu. Select “Uconnect” and enter the system’s PIN. Uconnect should announce “pairing complete.” Your phone is now paired.

How do I connect my iPhone 12 to Uconnect?

On iPhone

1. Go to SETTINGS.
2. Select BLUETOOTH.
3. Ensure BLUETOOTH toggle is switched to ON.
4. Select UCONNECT in devices list.
5. When prompted, verify PIN is same on iPhone and Uconnect screen.
6. Accept pair request by selecting YES on Uconnect screen and PAIR on iPhone.
7. Phone is now paired with Uconnect system.

How do you fix Uconnect Bluetooth?

To fix this issue, just go to the Bluetooth settings of your phone or Uconnect, and then set it to Discoverable. Wait for a while until the other device recognizes the device in Discoverable mode. If so, then start pairing!

Why my car and my Bluetooth Cannot connect anymore?

If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.

Why does my phone not connect to my car?

Restart your device. Go to Settings > Bluetooth, and turn off Bluetooth. Wait for about 5 seconds, then turn Bluetooth back on. Check the manual that came with your car for more information on how to pair with a Bluetooth device.

How do you soft reset UConnect? For the latest Uconnect® version 8.4, this is how you can perform a soft reset of the system:

1. Turn your key in the ignition to “Run,” but leave the car in park.
2. Simultaneously press the volume button and the tuner knob at the same time.
3. Continue pressing them down for 10 – 20 seconds.